Ventura

How to set your Mac to use Hideez Bluetooth Dongle on Ventura

Reminder for macOS Ventura users: If your built-in Bluetooth is not working or physically damaged, you can restore its functionality using the Hideez Dongle and the Hideez Setup Application, which we developed specifically for such cases. Please download the HIDIS Setup Application and follow the on-screen instructions.

Step 1

Delete all paired devices in the list of Bluetooth devices.

Step 2

Insert the Dongle into the USB port and restart your Mac.

Step 3

Send a special command to the system through the terminal (command line), which allows the system to use the Hideez Dongle by default for Bluetooth devices.

Enter the following command in the Terminal window:

sudo nvram bluetoothHostControllerSwitchBehavior=always

Then you'll need to enter the password from your Mac account and press Enter.

Step 4. Restart your Mac.

After rebooting, your Mac will use the Dongle by Default.

If the Hideez Dongle is plugged in, the system will use it for your Bluetooth devices, and if it is not available, it will reconnect the Bluetooth devices to the system adapter.

You need to allow new accessories (e.g., USB Hub) to connect before you can use them with Dongle on your Mac laptop computer with Apple silicon.

Please, approve the connection, if you are using the USB hub with macOS Ventura:

How to check which Bluetooth your Mac is using now?

After you set it all up, you can check that the Dongle is really connected and ready to work.

For macOS Ventura, open up the Apple menu and click “About This Mac” to "About This Mac"-> “More Info” -> “General” -> “System Report” -> “Bluetooth”.

The information about your Bluetooth will be here, and the Manufacturer should be the same as on one of the screenshots:

Hideez USB Bluetooth Dongle

Last updated

Was this helpful?